Toggle Nav
My Cart

Narrow Larch Slats

£3.70
In stock
Product code:
LSSLAT

Prices Inc VAT.

Narrow Larch Slats

Our narrow range of Larch Battens are perfect for customers looking to create something special within their garden. The battens can be used to create a range of fence panels, benches, log bins and stores, furniture and more! 

  • High-quality Siberian Larch
  • Available in 1.8m & 2.1m Lengths
  • Premium finish with planed sides
  • 44mm Slats

Please note: We recommend the use of stainless steel nails, screws or fixings as other metals such as galvanised can cause staining and unsightly marks. Longer lengths available upon request.

.

Description

Our narrow range of individual fence battens are perfect for creative types looking to create something totally unique within their home or property. The larch battens allow customers to build their own fence panels, gates and screens which are renowned for creating a fresh modern look. Our Narrow Larch Slats are available in different lengths and widths - We also have a wide batten available.

Should you have any questions regarding our wide fence and gate battens or wish to seek some advice on how best to approach your project, please contact one of our team today on 0161 764 5362 or 07884 184 842 where we can give you the best advice.

Our range of Siberian Larch slats are perfect for those clients who wish to create their own screening, fencing, planters, etc.  The slats can be left as they are treated for outdoor use or should you wish to, you can stain them to a colour of your choice.

The slats are profiled to 44mm x 17mm and are planed smooth on all four sides, they have eased (slightly rounded) corners to give a premium finish to the timber, this will give a much higher quality look to any project over using say a rough sawn slat or roofing batten.

Wondering how many slats you need to order?

Well this would depend on the gap you want to use between them, with our slats being slightly wider than most on the market we have found that around 10-12mm works best, but this is just our opinion, this is your project so you decide what works best for you.

If you were looking to build a panel around 1.8m (6ft) high then you would need 32 slat, this is based on using a 12mm gap, we would also recommend a couple extra to run vertically on the rear, these keep the gaps between the slats even and consistent, so 34 slats in total.  Want a smaller gap of say 6mm? then you’d want around 36, plus the 2 for the rear 38 in total.

As much as our timber is high quality, being a natural product, we highly recommend clients add 5 - 10 % additional materials to your order, the odd knot, small chip or split is sometimes possible.

Timber is a natural product and sometimes has the odd defect/knot. Most can be rectified by sanding or trimming, but please allow a little extra material just in case.

More Information
category_description

Our narrow range of Siberian Larch Slats/Battens is a perfect option for customers looking to create a stylish, durable and modern feature within their property. The battens can be used to create a range of fence panels, benches, log bins and stores, furniture and more.

  • High-quality Siberian Larch
  • Available in 1.8m & 2.1m Lengths
  • Premium finish with planed sides
  • 44mm Slats
Write Your Own Review
You're reviewing:Narrow Larch Slats
We found other products you might like!