Pressure Treated Interlocking Slats
Our Interlocking slats can be used for a whole range of things, such as fence panels, planters gates, or cladding for a shed or outdoor building.
The slats are planed smooth & profiled to 61mm x 17mm, once interlocked together they give the look of our very popular 44mm slat but with a 5mm shadow line instead of an actual gap, this is perfect if you want to modern and contemporary slatted look, with the added benefit of giving full privacy as you have no gaps between the slats.
Available in 2.1m and 2.4m lengths for nationwide delivery, longer lengths are available, but these are for collection only
How many slats do you need? For a typical 1.8m high panel you would need approximately 36 slats, or another simple way to work out is for every 1 metre in height allow for 20 slats. Don’t forget you may want to add a 44mm pressure treated slat to your order for a capping/top to your panel.
As much as our timber is a quality product, it’s a natural product, knots, small chips, marking or scuffing can be quite common, any making is easily rectified with a little light sanding and knots or small chips usually solved by turning the slat so you have a good face side.
But to avoid any delays in finishing your project, we suggest adding some extra slats to your order, if you order the exact amount and find you have a couple that has a knot you do not like, or one that has worked loose, or something similar, then this will only slow your project down and potentially cost more money in extra delivery costs and replacement product.
Remember nature grew the tree and it didn’t check it with a spirit level while it was growing, allow for the odd quirk, bow or knot, order some additional just in case. We cannot guarantee that every slat will be perfect and therefore we cannot replace a slat because of something that is a natural occurrence.